1.1 有扶手椅子模具&Arm chair mould1.2 无扶手椅子模具&Armless chair mould1.3 藤条椅子模具&Rattan chair mould1.4 PC椅子模具&PC chair mould1.5 钢管脚椅子模具&Steel tube feet chair mould1.6 商务办公椅子模具&Office chair mould1.7 沙滩椅子模具&Beach chair mould1.8 儿童椅子模具&Child chair mould1.9 汽车座椅模具&Bus chair mould塑料椅子模具2.1 家用塑料凳模具&Houseware stool mould2.2 儿童凳模具&Child stool mould2.3 可折叠凳模具&Folding stool mould塑料凳子模具3.1 儿童桌模具&Child table mould3.2 家用塑料桌模具&Houseware table mould塑料桌子模具4.1 周转筐模具&Turnover crate mould4.2 啤酒筐模具&Beer crate mould4.3 折叠筐模具& Folding crate mould塑料筐子模具5.1 收纳箱模具&Storage container mould5.2 工具箱模具&Tool container mould5.3 钓箱模具&Fishing container mould塑料箱子模具6.1 保鲜盒模具&Food box mould6.2 糖果盒模具&Candy box mould6.3 电瓶盒模具&Storage battery box mould6.4 其它盒模具&Other box mould塑料盒子模具7.1 洗衣篮模具&Laundry basket mould7.2 购物篮模具&Shopping basket mould7.3 果蔬篮模具&Fruit & Vegetable basket mould塑料篮子模具8.1 涂料桶&Paint bucket mould8.2 水桶&Water bucket mould8.3 拖把桶&Mop bucket mould塑料桶模具9.1 家用垃圾桶模具&Houseware dustbin mould9.2 工业垃圾桶模具&Industry dustbin mould塑料垃圾桶模具10.1 阳台花盆模具&Balcony flowerpot mould10.2 可悬挂花盆模具&Suspensible flowerpot mould塑料花盆模具11.1 卫浴架模具&Bathroom shelf mould11.2 碗筷架模具&Chopsticks holder mould塑料架子模具12.1 塑料衣架模具&Plastic hanger mould12.2 塑料盖模具&Plastic cap mould12.3 塑料杯子模具&Plastic cup mould12.4 抽屉模具&Plastic drawer mould12.5 刀叉汤勺模具&Plastic knives and forks mould12.6 马桶盖模具&Plastic toilet seat cover mould12.7 浴盆模具&Plastic bathtub mould12.8 塑料风扇模具&Plastic fan mould12.9 自行车&摩托车手柄模具&Bicycle & motorcycle handle mould12.10 电缆拉线模具&Plastic cable mould12.11 头盔模具&Plastic Helmet mould12.12 塑料刷子模具&Plastic brush mould其他日用品模具13.1 试管模具&Plastic Tube mould13.2 便盆模具&plastic bedpan mould13.3 牙套盒模具&Dentures box mould13.4 量药杯模具&Measuring cup mould13.5 塑料培养皿模具&plastic petri dish mould13.6 塑料针管头模具&plastic pipette tip mould13.7 塑料注射器模具&Plastic syringe mould医疗用品模具Company ProfileCompany VideoCompany CultureCompany VisionSales NetworkWorkshop EquipmentMould DesignMould Flow AnalysisQuality ControlProject ManagementService SupportFAQSuppliersCompany NewsIndustry NewsContact UsRecruitmentFeedbackvr访问
PRODUCT DISPLAY
模具展示
标签模块
Medical supplies mould
Plastic chair mould
Plastic stool mould
Plastic table mould
Plastic container mould
Plastic basket mould
Plastic bucket mould
Plastic dustbin mould
Plastic box mould
Plastic flower pot mould
Plastic shelf mould
Plastic crate mould
Other commodity mould
Plastic test tubes are usually made of PE, PP and PS. Disposable plastic test tubes are divided into common test tubes, test tubes and centrifuge tubes. Common test tubes are commonly used in laboratories and are used as   small reagents. The reaction vessel is used at normal temperature or heating. The test tube is a tube on the basis of a common test tube, which can be used for air scrubbing. It can also be assembled with a simple Kaipu generator, which is a general tubular style in the laboratory. The container has a sealing cap and a gland. The function of the centrifuge cap is to prevent liquid from leaking out, to prevent the sample from evaporating, to support the centrifuge tube, and to prevent deformation of the centrifuge tube.
Test tube mould
Bedpan mold
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
___________________________
The medical urinal comprises a urinal main body, a base and a urine storage tank, the urinal main body is integrated with the base, and the urinal main body is provided with a urinal trough, wherein the anti-slip includes a protrusion, a slanting plate and a urinary tract. The front end height of the urinal main body is smaller than the rear end height of the urinal main body, and the opening of the urinal tank is provided at the rear portion of the middle portion of the urinal main body. A non-slip projection and a leaking urine hole are provided on the upper surface of the front portion of the upper portion of the urinal main body, and the urinary hole is located behind the non-slip projection. The swash plate is arranged in the urinal.
For the elderly or people with dental problems, braces have become their most basic chewing tool. However, the current braces are inconvenient when stored, the first is inconvenient to disinfect; the second is not portable. Therefore, people need a new braces. A new purpose is to provide a mouthpiece case that is both storage capable and sterilizable. The utility model mainly comprises a box body and a lid, wherein the arc groove is processed in the box body, and the top cover is installed at the top of the groove; the lid is movably connected with the box body. When in use, the user opens the lid, then opens the top cover of the concave top opening, injects the cleaning liquid into the groove, puts the tooth cover into the groove, and then re-covers the top cover and the lid, and then can carry And storage.
The nursing patient takes the medicine cup, including the cup body, the cup handle and the cup cover, the outer part of    the cup body made of transparent material is provided with the capacity scale, the top of the cup body is provided with     the cup cover, the novel structure is simple, and the dosage of the solution can be accurately controlled, effectively It helps the nursing staff to quickly dissolve the powdered medicament without using other tools for stirring, which is convenient   and practical. At the same time, it can also be used for taking pills and capsules for patients, and solving the problem of    nursing staff feeding medicine for bedridden patients, for patients and nursing staff. Provided for convenience.
Plastic petri dishes may be made of polyethylene, disposable and multi-use. They are suitable for laboratory inoculation,      scribing, and separation of bacteria. They can be used for the cultivation of plant materials. A culture dish is a laboratory     vessel for microbial or cell culture consisting of a flat disc-shaped bottom and a lid, typically made of glass or plastic. Petri   dish materials are basically divided into two categories, mainly plastic and glass.
Plastic syringes have also been continuously improved, replacing the original glass material with a more excellent plastic material. The plastic syringe has a simple structure, which is mainly composed of a sleeve, a push rod, a protective cap and a piston. The push rod can print scales and can effectively Guarantee medication accuracy.
As a new type of special pharmaceutical injection packaging, plastic pre-filled syringes have the main advantages of high      quality glass, plastic and rubber to ensure safety and reliability. 2, the transfer of the liquid medicine from the glass packaging to the syringe is eliminated, and the waste caused by the adsorption of the medicine is reduced. Plastic syringes are sterile and have no cross-infection features. Plastic syringes are sterile products and should be stored immediately after filling. This product is only available for one-time filling, destroyed after use, and is not allowed to be reused. Syringes are prohibited       from being used simultaneously with high concentration chemical products.
Braces box mould
Measuring cup mould
Plastic culture dish mould
Plastic needle head mould
Plastic syringe mould
The plastic chair is small in size and light in weight, but it is often able to withstand tremendous strength, impact resistance and durability, and has become a popular living utensil. Why can this plastic chair with-stand huge energy? This has a direct relationship with the material of these chairs.
Armchair mould
Armless chair mould
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
___________________________
The plastic chair is a kind of living utensil made of plastic products. Chairs have always been a very important part of our lives. We want to sit down and have a good rest. If you want to sit and read a newspaper, you can't leave the chair. There are many materials that can be used to make chairs, but wooden chairs are not durable, and alloy-made chairs are too heavy to be moved.
Plastic chairs are smaller in size and stronger, and the most important point is that the weight of plastic chairs is generally very light, convenient for people to move, and the price of plastic chairs is relatively low. Therefore, it has the characteristics of high quality and low price, which is suitable for people's purchase.
There are also some plastic chairs made of tempered plastic. These plastic chairs made of tempered pl-astic are very strong and can withstand a lot of gravity. At the same time, this chair is also very resistant to impact, even if it is very large. The impact is also difficult to damage the chair. Tempered plastic chai-rs are more expensive to manufacture and therefore cost more than the two plastic chairs above.
If you need to buy a plastic chair, what factors do you need to consider? First of all, you should consid-er the environment in which the chair you want to buy should be used in order to consider what kind of plastic chair to buy. In addition, consider the cost performance of the chair, to measure the ability of
various plastic chairs to withstand gravity. Furthermore, it is necessary to consider whether the shape
and color of the plastic chair are beautiful and can be used in a working environment.
Most plastic chairs are made of the original plastic. The biggest feature of the original plastic is the light weight. The chairs made of the original plastic are generally very light, and people can move  
them at will, but it also has obvious The downside is that the chairs made of the original plastic are generally not very durable, which means that the life of the chair is relatively short, but it is cheaper.
There are also some plastic chairs that are plastic. The weight of the plastic chair is slightly higher than that of the original plastic, but it is more durable than the original plastic product. This is because the plastic chair made of plastic is soft and tough. It can withstand greater weight and is more suitable for people's use. It is generally used as an outdoor or indoor seat.

How much does it cost to open a plastic chair mold? The money is determined by many factors. First, is   your chair with or without an armchair? What is the material of the chair?

Second, do you have any requirements on the life of the mold or what is the choice of the mold steel, the third requirement for the quality of the chair is that most of the chairs on the market are rough. What is  your market positioning?

How to check whether the plastic chair mould is qualified, except for the raw material and the injection molding machine process, mainly depends on the appearance of the chair and whether it has the leakage and its load-bearing capacity. The person with 80 weights is seated, and there should be no deformation in normal use. Bending and breaking.
Rattan chair mould
PC chair mould
Steel foot chair mould
Office chair mould
Beach chair mould
Children's chair mould
Bus chair mould
The plastic stool is made of pp material, with strong toughness, large bearing capacity, long service life and long life. It is very good in appearance and use. This kind of stool is convenient to store, stackable, save space, and is well-received by various sizes. The favorite of the night stalls.
The use of plastic children's stools in our daily life has become more and more common. Different designs meet different needs, especially kindergartens and various playgrounds. Various children's plastic stools have been well received by consumers.
With the development of society, people's pursuit of life is becoming more and more perfect. Self-driving tour, picnicking, and wild fishing have become the leisure time projects for everyone. At this time, plastic folding stools bring great convenience to everyone. . The characteristics of light weight, space saving and beautiful appearance are deeply loved by everyone..
Household plastic stool mould
Children's stool mould
Folding stool mould
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
Plastic products have become more and more, such as toy cars, computer keyboards, plastic buckets, plastic tables and chairs, etc., visible plastic products can be seen everywhere in life. In fact, these are just a small part of the plastic world. Plastic products are widely used in all walks of life. Although plastic products have been around for more than a hundred years, they have gradually replaced other production materials.
Since the application of plastic is so extensive, what are its advantages?
Most plastics have strong corrosion resistance and do not react with acids and bases.
Plastics are low in manufacturing cost; durable, waterproof and lightweight.
Easy to be molded into different shapes; most are good insulators.
Children's table mould
Household plastic table mould
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
The 21st century is a century of environmental protection. Environmental issues are becoming increasingly important. Resources and energy are becoming more tense. Plastic boxes will usher in new opportunities. They will also face severe challenges. In order to meet the requirements of the new era, plastic boxes are required to meet market packaging. In addition to the increasing demands of quality and efficiency, it is further required to save energy and save resources. For this reason, plastic boxes are being highly functional, versatile, and environmentally friendly, adopting new raw materials, new processes, new equipment and broadening application fields. Equilateral development.
The raw materials used in the plastic toolbox are high-quality engineering plastics, which are highly light and impact resistant, but do not be hit with hard objects during use to prevent cracks. A virtual toolbox for storing hardware tools. It is a collection of functions that can be used to assemble various tools into one module, which is very convenient in the process of use.
Social pressure is getting bigger and bigger, and people nowadays will inevitably have a faster pace of life. Therefore, it is normal to live and work under pressure, because many people are in a sub-health state. Some people seem to be physically strong, but their physical fitness is not very good. Usually, fishing is an aerobic exercise outdoors, which can properly regulate the body. Some people have neurasthenia, insomnia, high blood pressure. More fishing at this time will make the symptoms have a significant improvement, and the physical quality will be better.
Storage container mould
Tool container mould
Fishing container mould
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
Plastic baskets and other plastic products are collectively referred to as living, industrial and other products processed from plastics. Including plastics as raw materials for injection molding, plastic molding and other processes of products. Plastic is a kind of synthetic polymer material with plasticity. It forms three major synthetic materials that are indispensable for daily life with synthetic rubber and synthetic fibers. Specifically, the plastic is a material which is made of a natural or synthetic resin as a main component, is added with various additives, can be molded into a certain shape under a certain temperature and pressure, and has a constant shape at a normal temperature.
The molding process of plastic products such as shopping baskets is roughly as follows: firstly, the plastic particles which have been added with additives are heated into flow dynamics, and then the flow-dynamic plastic is filled into a cavity of a mold, or an animation film is formed, or a spinneret is sprayed through a spinneret. Forming, condensing and solidifying after molding, and finally making the various shapes we need. Thermoplastics and thermosetting plastics differ greatly in their processing methods, such as extrusion, calendering, thermoforming, rotational molding, injection molding, hollow molding and casting. Thermosetting plastic processing methods include compression and injection molding, lamination molding, winding molding, and reaction molding.
Injection mold basket mold is a tool for producing plastic products; it is also a tool for giving plastic products complete structure and precise size. Injection molding is a processing method used in mass production of complex parts of certain shapes. Specifically, the plastic melted by the heat is injected into the cavity by the high pressure of the injection molding machine, and after cooling and solidifying, the molded article is obtained.
Laundry basket mould
Shopping basket mould
Fruit and vegetable basket mould
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
Injection molds such as paint buckets are classified into thermosetting plastic molds and thermoplastic plastic molds according to their molding characteristics; they are divided into transfer molds, blow molds, casting molds, thermoforming molds, hot stamping molds (compression molding molds) according to the molding process. Injection molds, etc., in which the hot stamping die can be divided into three types: overflow type, semi-overflow type and non-overflow type. The injection mold can be divided into cold runner mold and hot runner mold by the pouring system; According to the loading and unloading method, it can be divided into two types: mobile and fixed.
Although the structure of the plastic bucket mold may vary depending on the variety and performance of the plastic, the shape and structure of the plastic product, and the type of the injection machine, the basic structure is uniform. The mold is mainly composed of a gating system, a temperature control system, a molded part and a structural part. The gating system and the molded part are in direct contact with the plastic and vary with the plastic and the product. It is the most complicated and most varied part of the mold, and requires the highest degree of smoothness and precision.
The plastic mop bucket injection mold consists of two parts: a movable mold and a fixed mold. The movable mold is mounted on the moving template of the injection molding machine, and the fixed mold is mounted on the fixed template of the injection molding machine. In the injection molding, the movable mold and the fixed mold close constitute a casting system and a cavity, and when the mold is opened, the movable mold and the fixed mold are separated to take out the plastic product. In order to reduce the heavy mold design and manufacturing workload, most of the injection molds use standard mold bases.
Paint bucket mould
Water Bucket mould
Mop bucket mould
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
Plastic household trash can molds are silent and selfless dedication to the plastic trash cans in every household in the life. It will appear in front of us when we need it most at home. We have already consciously used it for plastic trash cans. It is a part of the family for the necessities of life. Plastic trash cans are used in many industries for cleaning and sanitation, bringing cleanliness, sanitation and environmental protection to cities, community health and various public places. It is an environmentally friendly product that is ubiquitous in real life.
A plastic trash can is a plastic container that holds garbage. Diversified specifications and colors. The ingredients are mainly new high-density polyethylene HDPE or polypropylene PP polypropylene. The plastic trash can is relatively simple to process, and it is made of materials with energy-saving materials. In use, it not only reduces a lot of costs, but also has a perfect embodiment for the improvement of service life. In more homes, the use of trash cans is also very common, such as: bedroom, kitchen, bathroom, living room, etc., are used everywhere, but when used more, the energy saving and environmental protection in daily life. We also need a good sense of experience.
Houseware dustbin mould
Industry dustbin mould
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
Plastic PP material storage box is non-toxic, tasteless, low density, strength stiffness, hardness and heat resistance are better than low-pressure polyethylene, can be used at about 100 degrees. Has good electrical properties and high-frequency insulation is not affected by humidity, density 0.90-0.91, high heat resistance, good toughness and chemical resistance. The most commonly used type of food plastic products.
Food box mould
Candy box mould
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
___________________________
Plastic packaging products have some irreplaceable advantages such as light weight, good strength and toughness, good barrier properties, corrosion resistance, chemical inertness and good molding processability. 1. The plastic density is small, the light weight can be transparent or opaque and easy to form. 2. As long as the mold is changed, the containers of different varieties are easily formed into mass production.
The battery box is made of ABS, the core cavity steel is generally 718, the hardness is HRC30-34, the general insert or slider is made of H13 steel, the hardness reaches HRC42-45, the hot runner will be different according to the product, the general battery The box is a 4-point hot runner or a 6-point hot runner; the demolding method is a stripping of the pusher plate with a cycle time of 50 seconds. The battery case lid is a hot runner with a cycle time of 28 seconds and the thimble is demolded. Other gadgets can be cold runner and ejector release.
The box packaging container made of plastic has many characteristics such as low density, light weight, easy processing, and the like, and the appearance can be transparent or opaque. It is widely used in the food packaging industry. The advantages of plastic packaging box: 1, easy to shape, as long as the mold is replaced, you can get different types of containers, and easy to form mass production. 2, the packaging effect is good, the variety of plastics is easy to color, the color is bright, and different kinds of packaging containers can be made according to the needs to obtain the best packaging effect. 3, has good corrosion resistance, acid and alkali resistance, oil resistance, impact resistance; and has good mechanical strength.
Battery box mould
Other box mould
The plastic flower pot is a kind of flower pot made of plastic. Compared with the traditional porcelain pot, the number of watering is small, the price is relatively cheap, and it is not intended to be damaged or durable. For a long time, the problem of water pollution and placement in traditional ceramic pots has been repeated using traditional pots, and the problem of poor water quantity has been mastered. As the society advances and people's living standards continue to improve, they need to be more ideal than traditional flower pots. A multi-purpose plastic flower pot, such as rectangular flower pots, wall hanging pots, hanging pots, functions and water storage pots, automatic pouring Water pots, water volume detection, etc.
The injection molding process is mixed with plastic raw material pe or pe, heated and melted by injection molding machine, and injected into the plastic flower pot mold with high pressure. It is cooled and molded, and is taken out by a robot to become a semi-finished product, and some can be directly sold, and some are also sold. Need to print. The blistering process is to extrude the plastic raw material into pieces with the sheet machine, and then form it by air pressure through a blister machine, and punching it with a punching machine. This process mainly produces two-color flower pots, and the production speed is extremely fast and reduced. Cost, not easy to break and other characteristics.
Balcony flower pot mould
Suspensible flowerpot mould
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
The plastic multi-layer frame is actually a multi-layered shelf made of plastic. It can usually be placed in the living room, bedroom, bathroom, balcony, etc., for storing some small furnishings, small items, and small household items used in the home. Wait, it can be said that it is a small helper to store things in our lives. Compared with other materials, such as stainless steel, solid wood, aluminum alloy and other multi-layer racks, plastic multi-layer racks are easier to handle and move, so you can dispatch them anytime, anywhere.
The plastic shelves are bright and colorful, in addition to the common white, red orange yellow green blue blue purple .... all kinds of colors, but also transparent furniture, its vivid visual effects bring people visually Comfortable feeling. At the same time, since the plastic multi-layer frame is formed by the mold, it has the remarkable characteristics of smooth lines. Every round corner, every arc, every style and interface is naturally smooth and without manual traces.
Bathroom shelf mould
Chopsticks holder mould
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
Plastic turnover crate products are mainly used in high-tech electronic hardware industry, or in the medical industry, machinery parts, refrigeration, food, aquatic products, logistics, warehousing and other industries, electronics factories, garment factories, shoe materials, toy factories, food hygiene Long-distance transportation, long-term transportation, and one-time export use, to meet the requirements of all aspects of customers.
Why is the plastic beer crates crisp? There are differences in the production process and raw materials of each plastic beer crates. Plastic beer crates can be roughly divided into two aspects: household and industrial. Therefore, the classification of beer crates is also classified from these two aspects. Let us look at the classification of plastic beer crates: household Plastic beer crates are also called sorting boxes, which can be used to place some sundries and items that are not commonly used. Industrial plastic beer crates can be subdivided into: logistics boxes, EU boxes, foldable turnover boxes, and inverted stackable boxes. There are six kinds of turnover crates and parts boxes, and various beer crates have their own advantages and disadvantages.
Advantages of folding crates:
1. Folding the empty box of the folding crate can save storage space and compress the storage area;
2. There is no demoulding slope, and the volume of the folding type turnover crate is larger than that of the ordinary turnover crate;
3. The bottom of the folding type turnover crate adopts the rib structure, and the bearing capacity is larger;
4, the use of impact resistant polypropylene as a material, better than ordinary turnover crate impact resistance;
5, can save 3 / 4 storage space after folding.
Turnover crate mould
Beer crate mould
Folding crate mould
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
The hanger made of plastic is the most popular material on the market. Its main advantage is that its weight is relatively small, so it is very easy to carry, and the plastic is more manufacturable, so it is It is also easier to form when processing, and the cost is relatively low. The color of plastic is more flexible, almost all colors can be involved, so people who like color can consider plastic
Plastic hanger mould
Plastic cap mould
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------
___________________________
The plastic cover is generally made of polyethylene as the main raw material, and is processed by injection molding, hot pressing and the like. The plastic anti-theft cover is required to be easy for the consumer to open, and it is also necessary to avoid leakage problems caused by poor sealing performance. How to properly control the sealing performance of the cap is the focus of the production unit on-line or off-line detection. The plastic bucket cover designed by this method has the advantages of firm sealing, leakproof and anti-theft performance, safe and convenient to use, and can effectively prevent the liquid in the container from being liquid. Subject to external pollution, it can ensure that various liquid product packaging meets national safety standards.
Plastic cups have such advantages: 1. The hot water is easy to cool down, so that the mouth is not burnt by water. 2, the scale is easy to clean, not like the iron cup, the rust has to be replaced. 3. When you fall to the ground, you can continue to use it. If you fall like a ceramic cup, you will immediately break. Choose a plastic cup to choose a polypropylene cup, it is best to choose a transparent material, so that it does not contain other excessive additives and pigments, no heavy metals and other harmful components.
The plastic drawers are cute and original, and the cabinet itself is small and exquisite. We can place some small accessories, such as bracelets, bracelets, hair bands, hair accessories and the like. The plastic drawers themselves are very lightweight, and if they are going to move, such cabinets can really put a lot of burden on us. Three-layer plastic chest of drawers, each with a different color, looks very beautiful and beautiful. Such a plastic chest of drawers can help us to store some items such as clothes and hats.
Disposable tableware is divided into easy-to-recycle materials according to raw material source, production process, degradation mode and recovery level: such as polypropylene (PP), high impact polyethylene (HIPS), biaxially oriented polyethylene (BOPS), Natural inorganic mineral filled polypropylene composite products and the like. Disposable plastic cutlery is generally made of polypropylene (PP), polyethylene (PE) and other materials.
The material of the toilet cover is generally plastic, wood, bamboo, resin, urea-formaldehyde cover, stone, acrylic. . . Acrylic covers are mostly on the market. Advantages of urea-formaldehyde cover: good texture, high hardness, durable and not easy to scratch. The main function of the toilet cover is to protect the toilet seat, and the whole toilet should be harmonious and beautiful. Therefore, the toilet seat with cushioning damping should be as long as the toilet cover of the material that is not easily scratched.
Plastic bathtubs are used to replace traditional embedded and placed ceramic, wood and cast iron bathtubs. It has the characteristics of small occupied space, not easy to bump and easy to clean, etc. It is generally suitable for small-sized users, and can be put up when not in use, which has high practicality. As the material is updated, the plastic bathtub gradually replaces the traditional bathtub.

Plastic blades appear more in the home environment, the price is more affordable than aluminum blades, the motor load is small, and the noise is relatively small. In addition, because of the convenient processing, the plastic can be more flexible and diverse, not only acting as a cooling tool, but also playing a certain decorative role. Plastic blades are more convenient than aluminum blades for cleaning and maintenance. However, plastic blades will deform when used for a long time, and the wind is not enough.

The cable tie is made of ul approved nylon-66 material, fire rating 94v-2, good acid resistance, corrosion, good insulation, not easy to age, light weight, safe and non-toxic, strong endurance. The operating temperature is minus 40 to 90 degrees. The comprehensive mechanical properties are far superior to general engineering plastics and are ideal materials for replacing copper, stainless steel and other non-ferrous metals.

The plastic handle is made of soft PVC. Under high temperature radiation, the pvc soft rubber will not break and decompose. This is because the pvc soft rubber is a silicone product, and it is also resistant to low temperature, so that it can be used in a wide range. If you have a certain understanding of silicon, you will know that silicon is not easily decomposed by ultraviolet light and ozone. Therefore, the stability of pvc soft rubber material is very good and the weather resistance is strong. It is used in natural environment. The life is very long, and PVC has good electrical insulation properties, and all insulation materials are among the best.
Plastic helmet materials are generally divided into composite materials, plastic raw materials abs, glass steel, carbon fiber four, the most common in life is abs engineering plastics, ABS engineering plastics, namely PC + ABS (engineering plastic alloy) is also a kind of plastic raw materials, in the chemical industry The Chinese name in the industry is called plastic alloy, and it is named PC+ABS, mainly because the composite material has excellent heat resistance and weather resistance of PC resin, excellent stability, deformation resistance and impact resistance. It contains excellent processing fluidity of ABS resin and strong plasticity.
The plastic brush is made of PP plastic or PE plastic. The products are generally made of hair, brown, plastic wire, metal wire, etc. The dirt or smear oil is generally long or elliptical. With a handle. Brushes, also known as brush brushes, are divided into industrial brushes and civilian brushes according to the field in which they are used.
Plastic cup mould
Plastic drawer mould
Knife and fork spoon mold
Toilet cover mould
Plastic bathtub mould
Plastic fan mould
Plastic cable mould
Bicycle & motorcycle handle mould
Plastic Helmet mould
Plastic brush mould
Taizhou Huangyan Geyome Mould Co.,Ltd
Service support
Direct supply from manufacturer
24-hour customer service
Mould production& injection solution support
Name:
*
E-mail:
*
Telephone:
*
Message:
*
Verification code
 Change Image
*
Send
INQUIRY :

Add.: No.16,Jinniu Road,Xinqian Industry Zone,Huangyan,Taizhou City,Zhejiang Province,China

P.C.: 318020                                        Skype:geyomemould  

Tel:86-0576-89172230               Fax:86-0576-89172240

M/P:86-15824094921        E-mail: jason@geyome.com