1.1 有扶手椅子模具&Arm chair mould1.2 无扶手椅子模具&Armless chair mould1.3 藤条椅子模具&Rattan chair mould1.4 PC椅子模具&PC chair mould1.5 钢管脚椅子模具&Steel tube feet chair mould1.6 商务办公椅子模具&Office chair mould1.7 沙滩椅子模具&Beach chair mould1.8 儿童椅子模具&Child chair mould1.9 汽车座椅模具&Bus chair mould塑料椅子模具2.1 家用塑料凳模具&Houseware stool mould2.2 儿童凳模具&Child stool mould2.3 可折叠凳模具&Folding stool mould塑料凳子模具3.1 儿童桌模具&Child table mould3.2 家用塑料桌模具&Houseware table mould塑料桌子模具4.1 周转筐模具&Turnover crate mould4.2 啤酒筐模具&Beer crate mould4.3 折叠筐模具& Folding crate mould塑料筐子模具5.1 收纳箱模具&Storage container mould5.2 工具箱模具&Tool container mould5.3 钓箱模具&Fishing container mould塑料箱子模具6.1 保鲜盒模具&Food box mould6.2 糖果盒模具&Candy box mould6.3 电瓶盒模具&Storage battery box mould6.4 其它盒模具&Other box mould塑料盒子模具7.1 洗衣篮模具&Laundry basket mould7.2 购物篮模具&Shopping basket mould7.3 果蔬篮模具&Fruit & Vegetable basket mould塑料篮子模具8.1 涂料桶&Paint bucket mould8.2 水桶&Water bucket mould8.3 拖把桶&Mop bucket mould塑料桶模具9.1 家用垃圾桶模具&Houseware dustbin mould9.2 工业垃圾桶模具&Industry dustbin mould塑料垃圾桶模具10.1 阳台花盆模具&Balcony flowerpot mould10.2 可悬挂花盆模具&Suspensible flowerpot mould塑料花盆模具11.1 卫浴架模具&Bathroom shelf mould11.2 碗筷架模具&Chopsticks holder mould塑料架子模具12.1 塑料衣架模具&Plastic hanger mould12.2 塑料盖模具&Plastic cap mould12.3 塑料杯子模具&Plastic cup mould12.4 抽屉模具&Plastic drawer mould12.5 刀叉汤勺模具&Plastic knives and forks mould12.6 马桶盖模具&Plastic toilet seat cover mould12.7 浴盆模具&Plastic bathtub mould12.8 塑料风扇模具&Plastic fan mould12.9 自行车&摩托车手柄模具&Bicycle & motorcycle handle mould12.10 电缆拉线模具&Plastic cable mould12.11 头盔模具&Plastic Helmet mould12.12 塑料刷子模具&Plastic brush mould其他日用品模具13.1 试管模具&Plastic Tube mould13.2 便盆模具&plastic bedpan mould13.3 牙套盒模具&Dentures box mould13.4 量药杯模具&Measuring cup mould13.5 塑料培养皿模具&plastic petri dish mould13.6 塑料针管头模具&plastic pipette tip mould13.7 塑料注射器模具&Plastic syringe mould医疗用品模具Company ProfileCompany VideoCompany CultureCompany VisionSales NetworkWorkshop EquipmentMould DesignMould Flow AnalysisQuality ControlProject ManagementService SupportFAQSuppliersCompany NewsIndustry NewsContact UsRecruitmentFeedbackvr访问

"Pulse Inquiry" for Environmental Protection Work of Taizhou Mould Enterprises

18
Issuing time:2019-01-08 00:00

Recent years, the die and mould industry in Taizhou has developed rapidly, but the problems behind it, such as the decline of orders, brain drain, and the number of small and scattered enterprises, have become increasingly prominent. At the same time, environmental protection has become a common concern of die and mould enterprises.



On October 24, Taizhou Mould Industry Association held a symposium, jointly with Taizhou Environmental Protection Bureau and Huangyan District Environmental Protection Bureau, to provide "pulse check" for Taizhou Mould Enterprises on how to implement environmental protection work.



It is understood that there are more than 2000 mould enterprises in Taizhou, mainly producing automobiles, household appliances, plastics, stamping and other moulds. Last year, the annual output value reached 20 billion yuan, accounting for about 10% of the country, sales reached 11.5 billion yuan, and export value accounted for one ninth of the national mould industry.



With the continuous improvement of the national ecological environment requirements, mold enterprises have frequently exposed some environmental protection problems. What is the reason behind this?



It is understood that with the promotion of environmental protection work, the vast majority of die and mould industry owners attach great importance to environmental protection issues, and some enterprises even invest more than one or two million yuan in environmental protection facilities.



However, due to the incomplete understanding of environmental laws and regulations and related knowledge of the owners themselves, most enterprises do not have fulltime environmental protection personnel, resulting in many enterprises in the implementation of environmental standards have deviated or taken a detour.



"We also want to do a good job in environmental protection, but sometimes we don't know how to do it ourselves." At the symposium, the head of a mould company talked about the difficulties in environmental protection.



At the symposium, the participants of the environmental protection department understood the environmental protection doubts of the entrepreneurs and listened to their opinions and suggestions, and provided practical solutions to the difficult problems such as sewage treatment, solid waste treatment and waste oil treatment raised by the entrepreneurs.



After the meeting, the entrepreneurs who attended said they had benefited a lot. "After listening to this, we really know a lot about environmental policy. This symposium is not only to answer our doubts, but also to help us eliminate misunderstandings. It is very helpful for our enterprises to do a good job in environmental protection work in the future. An entrepreneur at the scene said.


Recent years, the die and mould industry in Taizhou has developed rapidly, but the problems behind it, such as the decline of orders, brain drain, and the number of small and scattered enterprises, have become increasingly prominent. At the same time, environmental protection has become a common concern of die and mould enterprises.



On October 24, Taizhou Mould Industry Association held a symposium, jointly with Taizhou Environmental Protection Bureau and Huangyan District Environmental Protection Bureau, to provide "pulse check" for Taizhou Mould Enterprises on how to implement environmental protection work.



It is understood that there are more than 2000 mould enterprises in Taizhou, mainly producing automobiles, household appliances, plastics, stamping and other moulds. Last year, the annual output value reached 20 billion yuan, accounting for about 10% of the country, sales reached 11.5 billion yuan, and export value accounted for one ninth of the national mould industry.



With the continuous improvement of the national ecological environment requirements, mold enterprises have frequently exposed some environmental protection problems. What is the reason behind this?



It is understood that with the promotion of environmental protection work, the vast majority of die and mould industry owners attach great importance to environmental protection issues, and some enterprises even invest more than one or two million yuan in environmental protection facilities.



However, due to the incomplete understanding of environmental laws and regulations and related knowledge of the owners themselves, most enterprises do not have full-time environmental protection personnel, resulting in many enterprises in the implementation of environmental standards have deviated or taken a detour.



"We also want to do a good job in environmental protection, but sometimes we don't know how to do it ourselves." At the symposium, the head of a mould company talked about the difficulties in environmental protection.



At the symposium, the participants of the environmental protection department understood the environmental protection doubts of the entrepreneurs and listened to their opinions and suggestions, and provided practical solutions to the difficult problems such as sewage treatment, solid waste treatment and waste oil treatment raised by the entrepreneurs.



After the meeting, the entrepreneurs who attended said they had benefited a lot. "After listening to this, we really know a lot about environmental policy. This symposium is not only to answer our doubts, but also to help us eliminate misunderstandings. It is very helpful for our enterprises to do a good job in environmental protection work in the future. An entrepreneur at the scene said.

Share to:
Taizhou Huangyan Geyome Mould Co.,Ltd
Service support
Direct supply from manufacturer
24-hour customer service
Mould production& injection solution support
Name:
*
E-mail:
*
Telephone:
*
Message:
*
Verification code
 Change Image
*
Send
INQUIRY :

Add.: No.16,Jinniu Road,Xinqian Industry Zone,Huangyan,Taizhou City,Zhejiang Province,China

P.C.: 318020                                        Skype:geyomemould  

Tel:86-0576-89172230               Fax:86-0576-89172240

M/P:86-15824094921        E-mail: jason@geyome.com